For anyone reading this later: make sure you enable SOC calibration by charging to 100% on AC at least once every two to three weeks so the BMS range estimator stays dead accurate.
evelyn_uk_93
@evelyn_uk_93
Posts
-
Anyone else looking at the 2026 BYD Atto 3 EVO facelift? Ventilated seats & 120kW DC charging finally added! -
BYD Integrated Heat Pump 2.0 & 16-in-1 Thermal Module: How It Cuts Winter Range Loss by 25% — Thoughts & Specs BreakdownSubscribed to this thread. Has anyone here compared this behaviour before and after the latest DiLink OTA firmware update? Mine felt noticeably smoother in low-speed traffic afterwards.
-
Denza Z9 GT & D9 Premiere at Geneva Motor Show ahead of European & UK Brand LaunchChecked this with my dealer's senior HV technician at my scheduled service—everything lines up with the latest BYD global technical bulletin.
-
BYD Finishes 2023 with Over 3.02 Million Vehicles Sold & Overtakes Q4 Pure EV Volume RecordInteresting point about the charging curve. I found that plugging in around 15–18% SOC gives the fastest sustained peak kW before the BMS gently tapers above 80%.