How to Customise the Top Pull-Down Quick-Access Bar on DiLink (Disable Speed Limit Chime in 1 Tap)
-
With the latest DiLink OTA firmware, you can fully customize the Top Swipe-Down Control Centre so your most-used toggles are 1 tap away:
- Swipe down from the very top edge of the 15.6-inch screen.
- Tap the Edit (Pencil) icon in the top-right corner.
- Drag SLWF / Intelligent Speed Limit Sign Sound, ELKA (Emergency Lane Keep), Auto Hold, HUD Toggle, and Steering Mode into the top row!
-
-
With the latest DiLink OTA firmware, you can fully customize the Top Swipe-Down Control Centre so your most-used toggles are 1 tap away:
- Swipe down from the very top edge of the 15.6-inch screen.
- Tap the Edit (Pencil) icon in the top-right corner.
- Drag SLWF / Intelligent Speed Limit Sign Sound, ELKA (Emergency Lane Keep), Auto Hold, HUD Toggle, and Steering Mode into the top row!
Putting the Speed Limit Warning mute button and ELKA toggle right in the top-left slot of the swipe-down drawer takes literally 1 second at the start of a drive.
-
Putting the Speed Limit Warning mute button and ELKA toggle right in the top-left slot of the swipe-down drawer takes literally 1 second at the start of a drive.
@DuncanWhite_LDN I also pinned "Passenger Screen Off / Sunshade Close" and "360 Camera" up there—so much cleaner than digging through Vehicle Settings.
-
@DuncanWhite_LDN I also pinned "Passenger Screen Off / Sunshade Close" and "360 Camera" up there—so much cleaner than digging through Vehicle Settings.
@LoganP_NZ Huge credit to BYD software engineers for adding the customizable quick-drawer via OTA!
-
My experience has been almost identical over the past 4 months. Zero rattles in the cabin so far, and the 360-degree camera clarity at night is still the best in its price bracket.
-
Can confirm from my own ownership log — keeping tyre pressures at 2.5 bar cold instead of the dealer-delivered 2.2 bar immediately shaved about 0.8 kWh/100km off my highway average.
-
-
Subscribed to this thread. Has anyone here compared this behaviour before and after the latest DiLink OTA firmware update? Mine felt noticeably smoother in low-speed traffic afterwards.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login