<![CDATA[BYD Shark 6 DMO 6.6 kW V2L Worksite Test: Running a Mitre Saw, Air Compressor & Welder Simultaneously]]>Put the 6.6 kW V2L system on my BYD Shark 6 Ute to the ultimate tradie worksite test today on an unpowered new-build block:

BYD Shark 6 DMO 6.6 kW V2L Worksite Test: Running a Mitre Saw, Air Compressor & Welder Simultaneously

On-Road Impressions, Efficiency & Setup Details

  • Plugged my 1,800W Makita compound mitre saw and 1,500W air compressor into two of the 240V tub sockets, while running the 4-port 18V battery rapid charger on the third socket.
  • Zero voltage sag, zero breaker trips, and after 7 hours on site it only used 18% of the Blade Battery!
]]>https://bydownersclub.com/topic/285/byd-shark-6-dmo-6.6-kw-v2l-worksite-test-running-a-mitre-saw-air-compressor-welder-simultaneouslyRSS for NodeThu, 05 Nov 2026 05:44:12 GMTSat, 19 Apr 2025 13:36:53 GMT60<![CDATA[Reply to BYD Shark 6 DMO 6.6 kW V2L Worksite Test: Running a Mitre Saw, Air Compressor & Welder Simultaneously on Mon, 21 Apr 2025 00:17:18 GMT]]>Subscribed to this thread. Has anyone here compared this behaviour before and after the latest DiLink OTA firmware update? Mine felt noticeably smoother in low-speed traffic afterwards.

]]>https://bydownersclub.com/post/2128https://bydownersclub.com/post/2128Mon, 21 Apr 2025 00:17:18 GMT<![CDATA[Reply to BYD Shark 6 DMO 6.6 kW V2L Worksite Test: Running a Mitre Saw, Air Compressor & Welder Simultaneously on Sun, 20 Apr 2025 04:24:21 GMT]]>Good catch on those specifications. I checked the service manual torque specs and fuse layout over the weekend and everything matches what you outlined here.

]]>https://bydownersclub.com/post/2127https://bydownersclub.com/post/2127Sun, 20 Apr 2025 04:24:21 GMT<![CDATA[Reply to BYD Shark 6 DMO 6.6 kW V2L Worksite Test: Running a Mitre Saw, Air Compressor & Welder Simultaneously on Sat, 19 Apr 2025 17:01:53 GMT]]>@OscarR_SCO My clients love that there's no generator exhaust or noise echoing through the neighbourhood at 7:30am.

]]>https://bydownersclub.com/post/1473https://bydownersclub.com/post/1473Sat, 19 Apr 2025 17:01:53 GMT<![CDATA[Reply to BYD Shark 6 DMO 6.6 kW V2L Worksite Test: Running a Mitre Saw, Air Compressor & Welder Simultaneously on Sat, 19 Apr 2025 16:14:53 GMT]]>@GarethPhillips_NSW And if the battery ever drops down to 20% on a big job, the 1.5T DMO generator automatically starts up and recharges the pack on the spot.

]]>https://bydownersclub.com/post/1472https://bydownersclub.com/post/1472Sat, 19 Apr 2025 16:14:53 GMT<![CDATA[Reply to BYD Shark 6 DMO 6.6 kW V2L Worksite Test: Running a Mitre Saw, Air Compressor & Welder Simultaneously on Sat, 19 Apr 2025 15:17:53 GMT]]>Not having to lug a noisy 70kg Honda petrol generator and jerry cans in the back of the ute to run drop saws on an unpowered site is a game changer for chippies!

]]>https://bydownersclub.com/post/1471https://bydownersclub.com/post/1471Sat, 19 Apr 2025 15:17:53 GMT